ComAp InteliDrive Lite

ID-FLX Lite & Telecom Global Guide
171
Setpoint group Sensors Spec Related FW 2.5.0
Range [units] -1000 .. +1000 [-]
Default value 0 -
Step 1
Comm object 11914 Related applications
Description
Calibrate the constant to adjust the measured value of ID-Lite analog inputs. Physical dimension of
calibrating constant is corresponding to analog input.
Note: Calibration constants have to be adjusted when measured value is near the alarm level.
Calibr AI7
6 back to List of setpoints
Setpoint group Sensors Spec Related FW 2.5.0
Range [units] -1000 .. +1000 [-]
Default value 0 -
Step 1
Comm object 11915 Related applications
Description
Calibrate the constant to adjust the measured value of ID-Lite analog inputs. Physical dimension of
calibrating constant is corresponding to analog input.
Note: Calibration constants have to be adjusted when measured value is near the alarm level.
Calibr AI8
6 back to List of setpoints
Setpoint group Sensors Spec Related FW 2.5.0
Range [units] -1000 .. +1000 [-]
Default value 0 -
Step 1
Comm object 11916 Related applications
Description
Calibrate the constant to adjust the measured value of ID-Lite analog inputs. Physical dimension of
calibrating constant is corresponding to analog input.
Note: Calibration constants have to be adjusted when measured value is near the alarm level.
Calibr AI9
6 back to List of setpoints