ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
31
Fuse value and type depends on number of connected devices and wire length. Recommended fuse (not fast)
type – T1A. Not fast due to internal capacitors charging during power up.
4.7.5 Binary output protections
Do not connect binary outputs directly to DC relays without protection diodes, even if they are not connected
directly to controller outputs.
4.7.6 Magnetic pick-up
To ensure proper function:
Use a shielded cable
Be aware of interference signal from Speed governor, if one speed pick up is used.

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English