ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
50
5.13.2 InteliDrive Lite Analog inputs screens
Oil pressure (AI1 bargraph with protection limits indication)
Water temperature (AI2 bargraph with protection limits indication)
Fuel level (AI3 bargraph with protection limits indication)
Battery voltage (Power supply bargraph with protection limits indication)
First screen
AIN4 (Displayed only if is configured)
AIN5 (Displayed only if is configured)
AIN6 (Displayed only if is configured)
Second screen
AIN7 (Displayed only if is configured)
AIN8 (Displayed only if is configured)
AIN9 (Displayed only if is configured)
Third screen
5.13.3 IL-NT-AIO Analog inputs screen
AI1 (AI1 bargraph with protection limits indication, displayed only if is configured)
AI2 (AI2 bargraph with protection limits indication, displayed only if is configured)
AI3 (AI3 bargraph with protection limits indication, displayed only if is configured)
AI4 (AI4 bargraph with protection limits indication, displayed only if is configured)
Note: This screen is shown/hidden depending on whether the IL-NT AIO is configured or not.
Analog output AO1 is not displayed on any screen!
5.13.4 InteliDrive Lite Binary inputs
BI1 to BI7
5.13.5 InteliDrive Lite Binary outputs
BO1 to BO7

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English