ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
81
Table 7.1 Direct cable connection types
Note: It is possible to create multiple controller connection through RS485. Be aware of controller address
collision. Manage address setting for each controller in ControllerAddr (page 103).
Note: ComAp recommends using galvanicaly separated cable.
7.2 Remote connection
7.2.1 Internet connection
ID-Lite controllers can be monitored from PC tools as LiteEdit or InteliMonitor over the Internet using
InteliBridge-NT connected to the controller via IL-NT RS232-485 port, via optional IB-Lite plug-in module or via
IL-NT GPRS for cellular internet network, see Group: Communication settings on page 103.
7.2.2 AirGate connection
ID-Lite controllers can be monitored from PC tools as LiteEdit or InteliMonitor via AirGate. AirGate technology is
for easy plug and play wireless communication. Common SIM card with GPRS service is suitable for this
system. It overcomes problems with special SIM card (fixed and public IP) necessity, with firewalls and difficult
communication settings. For AirGate connection is possible to use IB-NT, IB-Lite or IL-NT GPRS modules. For
setting see Group: Communication settings on page 103.

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English