Comen STAR8000 - Cautions

2
patient from being constricted or suffocated or the cables from getting entangled and keep the
patient free from electrical interference.
 Do not use mobile phone near the monitor, because the mobile phone will generate a very
strong radiation field and disturb the functions of the monitor.
 For the patient with pacemaker, cardio tachometer might measure the heart rate by the pulse
of pacemaker when cardiac arrest or arrhythmia. Do not completely rely on the alarm of
cardio tachometer. The patient with pacemaker shall be closely monitored. For the inhibiting
capacity of relevant equipment on the pacemaker, refer to the Instruction Manual.
 The operators shall not touch the patients, tables and instruments during the defibrillation
period.
 Before reusing these cables, check whether the function is normal.
 The equipment connected with the monitor shall form an equipotential body (the protective
grounding wire is effectively connected).
 When the monitor is used in conjunction with the electro surgery unit, the user (doctor or
nurse) shall ensure the patients safety.
 The physiological waveforms, physiological parameters and alarm information, etc. displayed
by this monitor shall be for the doctors’ reference only and cannot be directly used as the
clinical treatment basis.
 The electromagnetic field will affect the performance of this instrument, so the use of the other
equipment near this instrument must meet corresponding EMC requirements. For example:
Mobile phone or X-ray equipment may be an interference source, because they will transmit
high-strength electromagnetic radiation.
 This monitor cannot be used in MRI room.
 This is not a treatment device.
1.1.3 Cautions
Caution
 To avoid damage to this instrument and guarantee patient safety, please use the accessories
designated in this instruction manual.
 Please properly install or move this instrument and prevent the instrument from being
damaged due to fall, collision, strong vibration or other external mechanical forces.

Before the instrument is switched on, please confirm whether the power supply used meets the
requirements for power supply voltage and frequency designated specified on the nameplate
label or in the instruction manual of this instrument.