Concept Pro DEEP LEARNING PLUS - Functionality with Concept Pro Recorder in Companion Mode

DEEP LEARNING PLUS USER MANUAL
14
1. Install the DL PLUS product on the same network as the desired, compatible Concept
Pro video recorder (e.g., VUHDIP Series NVR). Note: A firmware upgrade may be
required for the video recorder to work with DL PLUS.
2. From the Concept Pro Video Recorder user interface, navigate to <MENU> - <SYSTEM
SETUP> - <CAMERA> - <ANALYTICS> menu.
3. Under the <ACTIVATION> tab, select the <DL PLUS SCAN> button to scan the network
for any connected DL PLUS products. The DL PLUS device MAC address should
appear under the DL PLUS column. Select the DL PLUS button for each channel that
will be configured to use DL PLUS algorithms. Click <APPLY>.