Concept Pro DEEP LEARNING PLUS

To Next Page

To Previous Page

DEEP LEARNING PLUS USER MANUAL

DL TRIGGER

A wide variety of Deep Learning (DL) Triggers can be configured based upon deep learning

object identification and tracking algorithms. Supported DL Triggers are summarised below:

DL Trigger Type Description

Line Crossing Detection

Triggers when a target object is detected crossing a custom-

drawn line; can detect forward, reverse, or both directions.

Intrusion Detection

Triggers continually when a target object is detected entering

and remaining inside a custom-drawn area. Note: objects

remaining inside the area will continue to trigger Intrusion

Detection alerts until they exit the area.

Enter/Exit Area Detection

Triggers once when a target object enters/exits a

custom-drawn area.

Occupancy Detection

Triggers when an object count falls below and/or raises above

a pre-determined count; alternatively, can be set to alarm every

multiple of a configured count (e.g., every 5

object detected).

Loitering Detection

Triggers when a target object remains inside a custom-drawn

area for a configured time period.

Stopping Detection

Triggers when a target object enters and stops inside a

custom-drawn area for a configured time period.

Concept Pro DEEP LEARNING PLUS - DL Trigger