Concept Pro DEEP LEARNING PLUS - Product Installation; During Operation; Disassembly & Cleaning

7
DEEP LEARNING PLUS USER MANUAL
PRODUCT INSTALLATION
Comply with the following instructions to prevent accidents, physical injury, and improper
product operation:
• Keep at least 18 centimetres of distance between the product cooling fans/ventilation
holes and other surfaces such as walls to ensure proper product ventilation.
• Install the product on a flat surface.
• Keep the product away from direct sunlight or excessive heat sources (e.g., heaters).
• Only use the included standard power supply adapter or similarly rated power supply
adapter that matches the power supply specifications indicated in the product specification
sheet. Using any other power adapter may result in fire, electrical shock, or product damage.
• Incorrectly connecting the power supply adapter or replacing any product batteries may
cause explosions, fire, electric shock, or product damage.
DURING OPERATION
Comply with the following instructions to prevent a fire, explosion, system failure, or electric shock:
• Do not disassemble the product; if service appears to be required, please contact
product supplier for trained technician service.
• Do not connect multiple devices to a single power supply adapter. Exceeding the rated
power capacity may cause abnormal heat generation or fire.
• Keep product away from excessive dust or flammable substances (e.g., propane gas).
• Do not operate or handle the product with wet hands while the product is powered.
• Do not insert a conductor or other object into the ventilation system/holes.
• Do not apply excessive force when unplugging the power cord.
• Do not shake or apply excessive force to the product.
• Only use attachments or accessories specified by the product manufacturer.
DISASSEMBLY & CLEANING
Comply with the following instructions to prevent voiding product warranty or product damage:
• Use a dry cloth for cleaning the product surface.
• Do not wipe the product using water, paint thinner, or organic solvents.
• Never dismantle, modify, or attempt to repair the product.
Contact product supplier for maintenance.