Condair UDC - Condair MHR; Functional Description; Safety; Delivery

117Condair MHR
9 Condair MHR
9.1 Functional description
The mechanical room humidistat Condair MHR serves as a humidity monitor (maximum humidistat) in
rooms.
9.2 Safety
Please observe all local regulations concerning electrical installations.
The installation work must be performed only by adequately qualied personnel (electrician or work-
man with equivalent training).
Warning - danger of electric shock! Before starting the installation work the unit to which the Condair
MHR will be connected must be disconnected from the mains and may be reconnected to mains only
after all installation work has been completed.
Warning! The electronic components inside the Condair MHR and the humidier are very susceptible
to electrostatic discharges. For the protection of these components, measures must be taken during all
installation work to prevent damage caused by electrostatic discharge (ESD–protection).
9.3 Delivery
The delivery includes:
– Room humidistat Condair MHR
– Fixing material
– Installation manual
9.4 Mounting location
Install the Condair MHR in a protected and easy accessible place at least 1.5 m above the oor to the
wall (mounting on ush-mounting or wall-mounting box).Observe the following placement notes:
– Do not place the Condair MHR in niches, behind curtains, etc.
– Do not place the Condair MHR near heat sources, within the area with direct air draft or direct sun-
light.