Condair UDC - Condair CDA and CDA-S; Functional Description; Safety; Delivery

127Condair CDA and CDA-S
10 Condair CDA and CDA-S
CDA CDA-S
10.1 Functional description
The duct air ow monitor CDA or CDA-S is used to monitor the air ow in ventilation ducts.
10.2 Safety
Please observe all local regulations concerning electrical installations.
The installation work must be performed only by adequately qualied personnel (electrician or work-
man with equivalent training).
Warning - danger of electric shock! Before starting the installation work the unit to which the Condair
CDA or CDA-S will be connected must be disconnected from the mains and may be reconnected to
mains only after all installation work has been completed.
Warning! The electronic components inside the CDA and CDA-S and the humidier are very susceptible
to electrostatic discharges. For the protection of these components, measures must be taken during all
installation work to prevent damage caused by electrostatic discharge (ESD–protection).
10.3 Delivery
The delivery includes:
– Duct air ow monitor Condair CDA or CDA-S including mounting ange
– Fixing material
– Installation manual