Condair UDC - Condair RCC and RCC-NA; Functional Description; Safety; Delivery

68 Condair RCC and RCC-NA
5 Condair RCC and RCC-NA
RCC
RCC-NA
5.1 Functional description
PI humidity controller Condair RCC with integrated humidity sensor serves for the humidity control in
rooms. The output signal of the controller (0…10 VDC, 0…20 mA or 2…10 VDC, 4…20 mA) may be
customized by jumpers. The output signal of the RCC-NA is set xed to 0… 10 VDC.
5.2 Safety
Please observe all local regulations concerning electrical installations.
The installation work must be performed only by adequately qualied personnel (electrician or work-
man with equivalent training).
Warning - danger of electric shock! Before starting the installation work the unit to which the Condair
RCC or RCC-NA will be connected must be disconnected from the mains and may be reconnected to
mains only after all installation work has been completed.
Warning! The electronic components inside the Condair RCC or RCC-NA and the humidier are very
susceptible to electrostatic discharges. For the protection of these components, measures must be
taken during all installation work to prevent damage caused by electrostatic discharge (ESD–protection).
5.3 Delivery
The delivery includes:
– PI humidity controller Condair RCC or RCC-NA
– Fixing material
– Surface-mounting box (RCC only)
– Installation manual