Condair UDC - Condair UDC; Functional Description; Safety; Delivery

6 Condair UDC
1 Condair UDC
1.1 Functional description
The universal controller Condair UDC is a programmable controller and sensor for duct installation. It
has 2 control loops with 2 PI sequences each. The Condair UDC has an RS485 communication interface
which enables programming with a PC and the Easyset program. The Condair UDC uses the universal
X2 operating system.
Note: Ex factory the Condair UDC is congured as a humidity and temperature sensor.
1.2 Safety
Please observe all local regulations concerning electrical installations.
The installation work must be performed only by adequately qualied personnel (electrician or work-
man with equivalent training).
Warning - danger of electric shock! Before starting the installation work the unit to which the Condair
UDC will be connected must be disconnected from the mains and may be reconnected to mains only
after all installation work has been completed.
Warning! The electronic components inside the Condair UDC and the humidier are very susceptible
to electrostatic discharges. For the protection of these components, measures must be taken during all
installation work to prevent damage caused by electrostatic discharge (ESD–protection).
1.3 Delivery
The delivery includes:
– Universal duct controller Condair UDC
– Cable gland
– Fixing material
– Duct ange
– Installation manual