Conlog BEC62 - Token Acceptance Indication; System Busy (Hourglass) Indication

BEC62(08) technical manual
30
The display indicates a negative credit reading of negative
6237.81 kWh
Token acceptance indication
The “token accepted” icon, appears briefly after the consumer finishes keying in a 20 digit token, or a
three digit short code, and the token is accepted. If the audible feedback option is installed a short 60
millisecond beep will be heard.
System busy (hourglass) indication
When the “system busy” icon appears the keypad is disabled. The consumer must wait until the icon
disappears before entering data.