Conlog BEC62 - Short Code Index; Standard Definition Items

BEC62 (08) technical manual
48
Short code index
Short codes execute commands on the meter to either display information or configure settings.
For information on how to use short codes, see the Accessing information on the meter using short
codes section.
Note
Short codes that are not relevant to the (08) platform have been excluded from the list below.
Standard definition items
The STS dispenser test token, is a non meter specific code, used to perform a series of tests on the
meter. The test continues to step through the sequence automatically, briefly displaying the data
shown for each step.
To perform this test, enter the following 20 digit token:
5649 3153 7254 5031 3471
To view a specific item, simply enter the relevant short code i.e. #006# to view the tariff index.
Short code
Description
Display
000
Dispenser test (STS0)
This short code initiates the
dispenser test
001
Load switch test (STS1)
002
Display test (STS2)
003
Input device test (STS6), pressing 0-9 the
display will be filled with the value of the key
as shown
004
Accumulated energy consumption - MTTD
(STS3)