Conlog BEC62 - Page 49

49
BEC62 (08) technical manual
Short code
Description
Display
005
Key revision and key type (STS4)
006
Tariff index (STS5)
007
Maximum power limit (STS7)
008
Tamper status (STS8).
A ‘0’ indicates the meter is not in a tamper
state
A ‘1’ indicates the meter is in a tamper state
To perform these functions, tamper detection
must be enabled on the meter
009
Available credit
010
Phase unbalance (STS11)
011 - 029
STS Reserved
N/A