Conlog BEC62 - Viewing the Meters Serial Number; Viewing Consumption Information; Meter Total to Date (MTTD) and User Total to Date (UTTD)

BEC62(08) technical manual
32
Viewing the meter's serial number
Short code: #100#
The serial number displayed should match the serial number printed on the barcode label of the meter
and the identification card.
The meter serial number will scroll from right to left.
Viewing consumption information
The BEC62(08) meter provides historical and predictive views of consumption, based on the historical
data.
You can access this information using short codes.
Meter total to date (MTTD) and user total to date (UTTD)
Short code: #004#
MTTD
This is the total measured consumption for the life of the meter. It is calculated in 100 Wh increments
and the value cannot be cleared.
UTTD
This is the total measured consumption for the consumer. This value is cleared during a clear credit
process (tenancy change).
Menu item 1 displays the MTTD
Menu item 2 displays the UTTD