Contec BX220 Series User Manual

3. Hardware Setup
BX-220 User’s manual
15
3. Hardware Setup
Before Using the Product for the First Time
Follow the next steps to set up this product :
STEP1 By referring to the information in this chapter, install, connect and set this product.
STEP2 Connect cables.
Connect the cable of necessary external devices, such as keyboard and a display, to this
product using appropriate cables.
STEP3 Turn on the power.
After verifying that you have correctly followed steps 1 and 2, turn on the power.
If you find any abnormality after turning on the power, turn it off and check to see if the
setup has been performed properly.
STEP4 Set up BIOS.
By referring to Chapter 4, set up BIOS. This setup requires a keyboard and a display.
* Before using this product, be sure to execute " Restore Defaults " to initialize the BIOS
settings to their default values.
(See Chapter 4, " Save &a Exit.")
CAUT
ION
- Be sure to connect the keyboard and mouse to it before turning the power on for the first time.
- Be sure to connect the display before turning the power on. Connecting the display after turning the
power on may prevent it from being displayed properly.

Contec BX220 Series Specifications

General

Brand	Contec
Model	BX220 Series
Category	Touch Panel
Language	English