Contec BX220 Series - CSM Configuration

4. BIOS Setup
38
BX-220 User’s manual
CSM Configuration
Configure settings associated with the CSM (Compatibility Support Module), such as Option ROM
execution.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Advanced
Compatibility Support Module Configuration
CSM Support [Enabled]
CSM16 Module Version 07.76
GateA20 Active [Upon Request]
Option ROM Messages [Force BIOS]
Boot Option filter [UEFI and Legacy]
Option ROM execution
Network [UEFI]
Storage [UEFI]
Video [Legacy]
Other PCI devices [UEFI]
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Figure 4.10. CSM Configuration
Table 4.15. CSM Configuration
Item
Option
Description
CSM Support
Disabled
Enabled
Do not change this setting.
GateA20 Active
Upon Request
Always
Do not change this setting.
Option ROM Message
Force BIOS
Keep Current
Do not change this setting.
Boot option filter
UEFI and Legacy
Legacy only
UEFI only
Do not change this setting.
Network
Do not launch
UEFI
Legacy
Configure the PXE boot settings.
Storage
Do not launch
UEFI
Legacy
Do not change this setting.
Video
Do not launch
UEFI
Legacy
Do not change this setting.
Other PCI devices
Do not launch
UEFI
Legacy
Do not change this setting.