Contec BX220 Series - Giga Bit-Ethernet: LAN A, B

5. Each Component Function
BX-220 User’s manual
61
Giga bit-Ethernet: LAN A, B
This product is equipped with 2 ports for giga bit.
- Network type : 1000BASE-T/100BASE-TX/10BASE-T
- Transmission speed
*2
: 1000M/100M/10M bps
- Max. network path length : 100m/segment
- Controller : Intel I210IT controller
*2
Use a category 5e cable for 1000 Mbps operation.
Table 5.9. Giga bit-Ethernet Connector
LAN
Transmit
LED
Link
LED
8 1
Pin No.
Function
100BASE-TX
1000BASE-T
1
TX+
TRD+(0)
2
TX-
TRD-(0)
3
RX+
TRD+(1)
4
N.C.
TRD+(2)
5
N.C.
TRD-(2)
6 RX- TRD-(1)
7
N.C.
TRD+(3)
8
N.C.
TRD-(3)
LEDs for display of network statuses:
Right LED : Link LED
Normal connection : Green ON, Operation: Green Blinking
Left LED : Operation LED
10M: Off, 100M : Green, 1000M: Orange
CA
UT
ION
- If you are using an operating system other than the operating system of the preinstalled model,
LAN-1 and LAN-2 may not be assigned to the silkscreen-printed "LAN-A" and "LAN-B."
- Attention should to be paid to the guaranteed operating range of temperature in using 1000BASE-T.
For more details on this, refer to chapter3, Installation Requirements. Note that the Ethernet should
be configured as 100BASE-TX or 10BASE-T in using under the temperature 0 - 50°C.