Contec BX220 Series - LCD Control

4. BIOS Setup
BX-220 User’s manual
43
Item Option Description
DVMT Total Gfx Mem
128MB
256MB
MAX
Do not change this setting.
Aperture Size
128MB
256MB
512MB
Do not change this setting.
GTT Size
1MB
2MB
Do not change this setting.
LCD Control
Configure the LCD settings.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display [CRT]
Secondary IGFX Boot Display [DVI]
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Figure 4.15. LCD Control
Table 4.19. LCD Control
Item
Option
Description
Primary IGFX Boot
Display
CRT
DVI
Display Port
Configure the settings for the port that will be
output as the main display at start-up. Only the
main display is displayed during OS recovery.
Change the settings to suit the type of connected
display.
Secondary IGFX Boot
Display
Disabled
CRT
DVI
Display Port
Configure the settings for the port that will be
output as the auxiliary display at start-up. This
will make it possible to use an auxiliary display
after the OS boots.