Contec BX220 Series - System Configuration

5. Each Component Function
54
BX-220 User’s manual
Table 5.1. Component Function
Name
Function
POWER LED
Power ON display LED
STATUS LED
Status LED
ACCESS LED
CFast disk access display LED
DC-IN
DC power input connector
POWER-SW
Power switch
MIC IN
Mike in (φ3.5 PHONE JACK)
LINE OUT
Line out (φ3.5 PHONE JACK)
DVI-I
Display (29 pin, female)
Display Port
Display (20 pin, female)
USB3.0
USB3.0 port TYPE-A connector x 1
USB2.0
USB2.0 port TYPE-A connector x 2
LAN A
Ethernet 1000BASE-T/100BASE-TX/10BASE-T RJ-45 connector
LAN B
Ethernet 1000BASE-T/100BASE-TX/10BASE-T RJ-45 connector
CFast1
CFast card slot (SATA connection)
CFast2
CFast card slot (SATA connection)
SERIAL A
Serial port A connector (9pin D-SUB, male)
SERIAL B
Serial port B connector (9pin D-SUB, male)
RAS
RAS function and RS-422/485 connector (15 pinD-SUB, female)
System Configuration
BX-220D-DC7xxxxx
CFast Card
Printer
USB device such
as CD-ROM drive
LINE OUT
LAN A , B
SERIA L A
SERIA L B
Display
Figure 5.2. System Configuration