3. Hardware Setup
BX-220 User’s manual
21
Distances between this product and its vicinity
50mm or more
100mm or more
50mm or more
A
CFA
B
A
12 - 24
VDC
STATUS
DVI
1
50mm or more 60mm or more
100mm or more
Figure 3.8. Distances between this product and its vicinity
-
Wall temperatures should be within the guaranteed operating temperature range of the product.
-
Adjust the air flow so as not to allow waste heat from the product to accumulate around the product.
-
Do not install this product in completely sealed spaces, except when it is possible to adjust the
internal temperature using an air conditioner or similar equipment. Temperature increase caused by
long-term usage may result in operational malfunction or other problems.
To Next Page
Loading...