Contec BX220 Series - Page 40

4. BIOS Setup
BX-220 User’s manual
31
Table 4.7. WDT during Boot of the OS (Only Enabled)
Item Option Description
WDT Value (Seconds)
0-254
Sets the timeout time of WDT functions
WDT Timeup Function
None
Reset
Shutdown
PO2 Output High
PO2 Output Low
Sets the timeout behavior of WDT functions
None : None
Reset : Reset system
Shutdown：Shut down system
PO2 Output High：PO2 pin output High
PO2 Output Low：PO2 pin output Low