2. Overview
User’s Manual
9
System Configuration
IPC-BX/M600(PCW)CP
LAN
Printer
Dedicated LCD
IPC-DT/L40S(PC)T
IPC-DT/H40X(PC)T
Dedicated LCD cables
IPC-PL2020-020 (2m)
IPC-PL2020-050 (5m)
2.5inch hard (silicon) disk drive
Built-in
RS-232C
USB
CRTdisplay
Main memory
144pin SO-DIMM
IPC-PSD-20
RS-485
General-purpose I/O (3)
RAS
PC-HELPER
series
Terminal
block
Mouse
Keyboard
Option CD-ROM
* Not all devices shown in the
figure can be used
simultaneously due to
a limit on the number of
interrupt resources.
PCMCIA card slot (C, CP and C4P models)
PCMCIA types I, II x 2, or III x 1
Expansion slot
(CP and C4P models)
Dedicated
LCD
When three or more slots are needed, select
the C4P model. To use five or more slots or
a full-size board, connect the FA-PA(PC) series.
PCI and ISA
half-size boards
Dedicated FD Drive
PC-FDD25BH
FA-PAC(PC)
series
Expansion
bus adapter
Figure 2.1. System Configuration
To Next Page
Loading...
