5. Each Component Function
62 User’s Manual
PCMCIA Slots (C, CP and C4P Models)
The BOX-PC is equipped with PCMCIA-compliant card slots
[TYPE II x 2 (TYPE III x 1) size].
Slot 1
Slot 2
Figure 5.3. Slot Numbers and Locations
Note!
A type III card should be inserted into slot 2.
Attaching the Metal Brace to Keep the Card in Place
Insert the front end.
Figure 5.4. Attaching the Metal Brace to Keep the Card in
Place
Power Supply to the Card
The voltage that can be used and the current capacity of each slot
are as shown below:
Table 5.14. Power Supply to the Card
Voltage Current capacity (Max.)
+5V 1A/Slot
+3.3V 1A/Slot
+12V Not supplied.
To Next Page
Loading...
