3. Hardware Setup
User’s Manual
15
3.
Hardware Setup
Before Using the BOX-PC for the First Time
Follow the next steps to set up the BOX-PC:
STEP1 Install the hard disk and expansion main memory
(DIMM) and set jumper switches.
By referring to the information in this chapter, set the
BOX-PC.
STEP2 Connect cables.
Connect necessary external devices, such as a printer
and a CRT, to the BOX-PC using appropriate cables.
STEP3 Turn on the power.
After verifying that you have correctly followed steps
1 and 2, turn on the power. If you feel something is
wrong after turning on the power, turn off the power
immediately and check to see if the BOX-PC has
been set up correctly.
STEP4 Set up BIOS.
By referring to Chapter 4, set up BIOS. This setup
requires a keyboard and a display.
* Before using the BOX-PC, be sure to execute " LOAD SETUP
DEFAULTS" to initialize the BIOS settings to their default
values.
(See Chapter 4, "Main Menu.")
Note!
If Windows is pre-installed, always connect the keyboard and mouse
before turning on the power for the first time.
To Next Page
Loading...