Contec IPC-BX/600(PCW) - Page 50

4. BIOS Setup
User’s Manual
45
Save Changes : Saves values that have been modified
on the setup screen in CMOS
(EEPROM *1).
*1 S1's bit 2 allows you to specify the
location where setup details will be
saved and loaded.
Normally, set to ON (use CMOS).
ON: Uses the CMOS as the location to
save and load setup details.
(factory settings)
OFF: Uses the EEPROM as the
location to save and load setup
details.
S
1
ON
1 2 3 4 5 6 7 8
Figure 4.13. S1 Factory Setting