Helix Operator’s Manual
Publication Number: 621058497OPR - 30 - © 2012-2014, Cornelius Inc. All Rights Reserved
Product Cabinet Inspection
Open the product cabinet and pull out the bottom two product trays. Check for any
spilled product. Use cleaning solution and a clean cloth to remove any spilled product.
MONTHLY MAINTENANCE
The following procedures should be performed on a monthly basis.
• All weekly maintenance tasks
• Condenser cleaning (ice maker and product cabinet)
• Water feed reservoir inspection
• Ingredient sanitation
• Ice Maker sanitation
Condenser Cleaning
The condensers should be cleaned at least once a month (more often in harsh envi-
ronments). To clean the condensers, use a soft brush, vacuum cleaner or blow out
t
he condenser from the inside using compressed air.
SEMI-ANNUAL MAINTENANCE
The following procedures should be performed on a semi-annual basis.
• All weekly and monthly maintenance tasks
• Inspect and service water system
• Inspect tubing
• Check for condensation
• Check safety circuits
• Check for vibration/noise
• Inspect upper bearings on auger assembly
Water System Inspection
Check for water leaks in all of the tubing connections, water fittings and the lower ice
maker water seal.
To Next Page
Loading...
