Set the transparency of the local menu of the NVR device. The higher
the transparency, the more transparent the local menu.
Time
Display/Channel
Display
Select the check box and the date and time of the system will be
displayed in the preview screen.
Select the check box to optimize the preview image edges.
Select the check box to display the IVS rules in the preview interface.
This function is for some series products only.
Click Setting and select the channel to restore the corresponding
channel image to the original scale.
Select VGA+HDMI1 or HDMI2.
Different devices display different contents. See the actual situation.
Select the check box to enable this screen. The image can only be
displayed when the screen is enabled.
Check the box to test the object temperature, including trace the
high/low temperature.
Support 1920×1080, 1280×1024(default), 1280×720.
Enter the screen number you want to set the audio input.
Select the channel number.
Select from audio 1, audio 2 and mix output.
Step 3 Click Apply.
1.16.2 Tour
⚫ You can configure a tour of selected channels to repeat playing videos. The videos display in turn
according to the channel group configured in tour settings. The system displays one channel group for
a certain period and then automatically changes to the next channel group.
Step 1 Select Main Menu > DISPLAY > Tour.
⚫ The Tour interface is displayed. See Figure 1-248.
To Next Page
Loading...
