⚫ Step 4 Set login password of admin. See Table 1-1.
⚫ Table 1-1
By default, the user is admin.
In the Password box, enter the password for admin.
The new password can be set from 8 characters through 32
characters and contains at least two types from number, letter and
special characters (excluding"'", """, ";", ":" and "&").
In the Prompt Question box, enter the information that can remind
you of the password.
On the login interface, click , the prompt will display to help you
reset the password.
⚫ For your device own safety, create a strong password of your own choosing. We also recommend you
change your password periodically especially in the high security system. Step 5 Click Next.
The Unlock Pattern interface is displayed. See Figure 1-3.
⚫ Figure 1-3
⚫ Step 6 Set unlock pattern.
After set unlock pattern, the Password Protection interface is displayed. See Figure
1-4.
To Next Page
Loading...
