CPS SCA60KTL-DO/US-480 - Page 26

19
Table 3-2 Accessory Kit
No.
Item
Q’ty
Note
(1)
M6 X18mm Phillips
screw
12
4 for securing the wiring box to the
main enclosure; 6 for securing the
inverter to the mounting bracket; 1 for
the External Ground connection, 1
spare
(2)
5 pin PCB connector
plug
1 For the RS485 communication (Input)
(3)
3 pin PCB connector
plug
1
For the RS485 communication
(Output)
(4) M8 Nut 4 For the AC terminal block
(5) M8 Flat washer 4 For the AC terminal block
(6) M8 Spring washer 4 For the AC terminal block
(7) Phillips screw 1 Spare (for wire-box cover)
INSTRUCTION:
The items above in Table 3-2 Accessory Kit are for the typical
installation configuration. The accessories provided may vary if
optional parts are purchased.