Crestron HD-MD4X2-4KZ-E - Create New Local User

Web Interface Configuration Guide — Doc. 8907B HD-MD4X2-4KZ-E and HD-MD4X1-4KZ-E • 37
Create New Local User
1. Click Create User button in the User tab.
2. In the Create User dialog, enter the following:
a. Enter a user name in the Name field. Valid user name can consist of alphanumeric
characters (letters a-z, A-Z, numbers 0-9) and the underscore “_” character.
b. Enter a password in the Password field; re-enter the same password in the Confirm
Password field.
c. Assign the access level by selecting one or more groups from the Groups drop- down
list.
NOTE: Make sure that the Active Directory User slider is disabled.
3. Click OK to save. Click Cancel to cancel the changes.