CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
Enter the “Sequence Size”, which is the number of antenna sequence in each cycle. Please note
that the Sequence Size is equal to the number of active antenna port configured by user.
In the antenna sequence table, input the antenna port switching sequence in the column
“Antenna Port (0-15)” according to the available active antenna port index.
Click the “Apply” button to confirm.
Click “Apply” when the setting is confirmed.
To Next Page
Loading...
Need help?
General