Chapter 6. Manage / Configure the Switch
130
2). IP Multicast Registration Table
This table will show the learned IP multicast groups.
3).MVR VLAN
This page is used to configure MVR (Multicast VLAN Registration) function. VLAN function will isolate traffic
between VLAN groups. But it will also isolate IP multicast traffic for subscribers in different VLANs. The MVR
function allows one multicast VLAN to be shared by subscribers in different VLANs. That can reduce the multicast
traffic for VLANs.
Before configure MVR, complete the following two functions configuration first.
1. Complete 802.1Q VLAN setting first.
2. Enable IGMP snooping function first.
To Next Page
Loading...
Need help?
General
