CTC Union GSW-3208M - Show Line Command; Show Log Command

Chapter 6. Manage / Configure the Switch
77
10. show line command
This command is used to show current console line configuration.
show line console command is used to show current console line configuration.
# show line console
Password threshold: open-end time
Baudrate: 9600
Databits: 8
Parity : 0 [0|1|2|3][NONE|EVEN|ODD|MARK|SPACE]
Stopbits: 1
11. show log command
This command is used to show current system log and system log configuration.
# show log ?
configuration logging configuration
<cr>
show log command is used to show current system log content.
For example,
# show log
[5] Thu Jan 01 09:00:02 1970
Level: 4 System Started [port 0]
[4] Thu Jan 01 09:08:20 1970
Level: 4 Link down [port 8]
[3] Thu Jan 01 09:07:50 1970
Level: 4 Link up [port 8]
[2] Thu Jan 01 09:07:45 1970
Level: 4 Link down [port 8]
[1] Thu Jan 01 09:00:06 1970
Level: 4 System Started