CTC Union GSW-3208M - Show GVRP Command; Show History Command

Chapter 6. Manage / Configure the Switch
71
1/9 Force-Authorized
1/10 Force-Authorized
show dot1x configuration command is used to show 802.1x configuration and status of the switch. For example,
# show dot1x configuration
[802.1x Configuration]
802.1x System Authentication Status: Disable
Re-authentication: Disable
Re-authentication Timeout Period : 3600 seconds
Re-authentication Max Count: 2
Max Request Count: 2
Server Timeout Period: 30 seconds
Supplicant Timeout Period: 30 seconds
Quiet Timeout Period: 60 seconds
Tx Timeout Period: 30 seconds
Supplicant Allowed In Guest Vlan: Disable
Dynamic vlan: Disable
4. show gvrp command
This command is used to show current GVRP configuration.
show gvrp configuration command will show current GVRP configuration.
# show gvrp configuration
GVRP configuration: Disable
5. show history command
This command is used to show the history of input commands.
# show history
0. show
1. show gvrp configuration
2. show history