CTC Union GSW-3208M User Manual

Chapter 6. Manage / Configure the Switch
82
16. show mvr command
This command is used to show MVR configuration.
show mvr command is used to show MVR VLAN setting one after another.
show mvr x command is used to show a MVR VLAN setting. “x” is the VLAN ID.
For example,
# show mvr 11
Active: Yes
Name:
MVLAN: 11
802.1p Priority: 0
Mode: Dynamic
Source Port: Eth1/ 10
Receiver Port: Eth1/ 5 Eth1/ 6 Eth1/ 7
MVR Group Configuration:
Name Start Address End Address
--------------- --------------- ---------------
abc 224.0.0.1 224.0.0.2
abcd 224.0.0.3 224.0.0.4
17. show port command
This command is used to show port mirror function setting.
show port monitor command is used to show port mirror function setting.
For example,
# show port monitor
Mode: Disable
Destination port: 1
Source port:

CTC Union GSW-3208M Specifications

General

Brand	CTC Union
Model	GSW-3208M
Category	Switch
Language	English