Chapter 6. Manage / Configure the Switch
89
show vlan name yyy command is used to show VLAN setting of VLAN yyy. (“yyy” is the VLAN name).
For example,
# show vlan id 100
Vlan ID: 100
VLAN Type: Static
Name: P100
Ports/Port channel: Eth1/ 1(s) Eth1/ 2(s) Eth1/ 3(s) Eth1/ 4(s)
# show vlan name P100
Vlan ID: 100
VLAN Type: Static
Name: P100
Ports/Port channel: Eth1/ 1(s) Eth1/ 2(s) Eth1/ 3(s) Eth1/ 4(s)
show vlan private-vlan command is used to show Private VLAN settings.
For example,
# show vlan private-vlan
[Private VLAN Port Configuration]
Port# Port Type Primary VLAN Community VLAN Isolated VLAN
==============================================================
Eth 1/ 1 Normal none none none
Eth 1/ 2 Normal none none none
Eth 1/ 3 Normal none none none
Eth 1/ 4 Normal none none none
Eth 1/ 4 Normal 100 none none
Eth 1/ 6 Normal none none none
Eth 1/ 7 Normal none none none
Eth 1/ 8 Normal none none none
Eth 1/ 9 Normal none none none
Eth 1/10 Normal none none none
show vlan port-based command is used to show Port-based VLAN configuration.
For example,
# show vlan port-based
[Port-based VLAN Configuration]
To Next Page
Loading...
