CHAPTER 1 8454
3. SPECIFICATION
Maximum PTO power
Engine GROSS power
Engine
Model
Type
Indirect injection, vertical, water-cooled,
4cycle diesel
Number of cylinders
Bore and stroke
87 x 92.4 (3.425 x 3.638in.)
Total displacement
Rated revolution
Injection timing
Injection order 1-3-4-2
Compression ratio 22:01
Lubricating system Forced lubrication by trochoida pump
Cooling system
Pressurized radiator, Forced circulation
with water pump
Alternator 12V, 50 AMPS
Weight (Dry) 207 kg (456lb)
Capacities
Fuel tank 40 L (10.6 gal.)
Engine crankcase 7.0 L (1.9 gal.)
Engine coolant 8.9 L (2.4 gal.)
Transmission case 34.0 L (9.0 gal.)
Front axle case 8.2 L (2.2 gal.)
Dimensions
Overall length (without 3p) 3,073mm (120.9 in.)
(with std.tires)
Overall length (with 3p) 3,323mm (130.8 in.)
Overall Length (minimum tread) 1,550mm (61.0 in.)
Overall height (Top of ROPS) 2,235 mm (88.0 in.)
Overall height (Top of CABIN) 2,337 mm (92.0 in.)
Overall height (Top of steering wheel) 1,610 mm (63.3 in.)
Wheelbase 1,820 mm (71.6 in.)
Ground clearance 370 mm (14.5 in.)
Track width
Front 1,265 mm (49.8 in)
Rear
1,180 - 1,490mm (46.4 - 58.6 in.)
1-6
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983
To Next Page
Loading...
Need help?
General
