CUMMINS ALLISON JetScan iFX i100 - Page 102

JetScan iFX
®
i100 Scanner All Models
100
SBAT ENABLE OFF in SETUP SBAT ENABLE ON in SETUP
These error screens only appear on machines connected to an optional printer.
Condition
Action
The number of documents in
the pocket reached the
pocket limit selected in
SETUP
.
Remove documents from the pocket.
The machine automatically will continue processing if additional documents
remain in the hopper.
Condition
Action
The machine detected a
problem with the optional
printer.
These screens identify errors, including:
• PRINTER IS NOT CONFIGURED.
• PRINTER OFFLINE.
Corrective action should be taken. If the error cannot be resolved,
call a Cummins
Allison representative
.
Press
OK
to return to the screen from which
PRINT
was pressed.
If corrective action has not been taken, the error screen will appear again when
PRINT
is pressed.