CUMMINS ALLISON JetScan iFX i100 - Password Entry

© 2013 Cummins-Allison Corp.
13
Main Screen Key
Description
END
Press to end a batch or sub-batch when the ADD key is ON. When sub-batches are
enabled, pressing
END
once clears the sub-batch total and pressing
END
a second
time clears the batch total. If sub-batches are not enabled, pressing
END
once
ends the batch.
ADD
Toggles the ADD function ON and OFF. When ADD is ON, sub-batch and batch
totals accumulate after documents are removed from the sorting pocket. When
ADD
is
OFF
, batch totals clear when the user removes processed documents from
the pocket.
VERIFY
Press to enter the VERIFY function, which allows a batch or sub-batch to be
recounted without adding to current batch or day totals. Use
VERIFY
to reprocess
documents if the count is suspected of being inaccurate.
CF
Press to activate counterfeit detection, if the machine has counterfeit-detection
capability.
When processing international currency on a model with USD counterfeit
detection sensors, the
CF key
is gray, indicating note authentication is not
available.
MODE
Press to prompt the MODE-SELECTION screen, which displays all processing
modes that have been enabled in SETUP.
MENU
Press to view the MAIN SUB-MENU, which provides access to additional menus for
reports, machine adjustments, file-export capabilities, and settings for the
optional JetScan iFX Image Management Software (IMS).
Password Entry
The machine may be set up to require entry of a four-digit password to view the SPECIAL
MODE MENU, which includes machine functions such as setup parameters, diagnostics for
trained Cummins Allison personnel, and defaults. (For details, see
Setup Password.)