CUMMINS ALLISON JetScan iFX i100 - The Basics; Powering On;Off

JetScan iFX
®
i100 Scanner All Models
10
The Basics
Powering ON/OFF
To turn the machine ON, set the rocker switch located in the lower-left rear corner when facing
the front of the machine to the ON position (I). Allow the machine to complete its POWER-ON
sequence. The machine is ready to process documents when the touch panel displays the main
screen.
To turn the machine OFF, ensure the machine is not processing documents, and then set the
rocker switch located on the rear of the machine to the OFF position (O).
High-voltage levels may be present. Risk of electric shock.
Turn power
OFF
and unplug power cord from machine before cleaning.
Do not attempt repairs. Repairs must be made by authorized Cummins
Allison personnel.
Plug three-prong grounded plug (supplied) into properly grounded three-
prong outlet.
Read and understand all instructions before use.
Only use Cummins Allison supplied power adapter.
Use of any other power adapter may damage equipment.