CUMMINS ALLISON JetScan iFX i100 User Manual

© 2013 Cummins-Allison Corp.
73
Document Capture: Storage Setup
Pressing STORAGE SETUP at DOCUMENT CAPTURE on SETUP MAIN MENU 3 prompts
one of the following screens, depending on the active option.
These screens are used to enable the following imaging options:
• Serial-number capture for all or select denominations.
• Check capture for MICR characters.
• Ticket capture for bar-code characters.
Denominations and document types are itemized in the DOC TYPE column.
The CAPTURE DATA column indicates whether an imaging option is active for a denomination
or document type.
To activate serial-number, check or ticket capture:
1. Press  or  to move the cursor in the CAPTURE DATA column. Stop on the desired field.
2. Press ON or OFF to enable or disable the option.
3. Repeat the previous steps as needed.
4. Press SAVE to retain settings.
5. Press EXIT to return to SETUP MAIN MENU 3.
The DOCUMENT CAPTURE buttons are only available on machines with imaging
options activated (serial-number, check or ticket capture).
These settings determine which document values are collected for reports and
file exporting.
If EXIT is pressed before SAVE, the CONTINUE AND ABANDON CHANGES screen
appears.
Press
NO
to prompt the active DOCUMENT DATA STORAGE screen and retain
changes by pressing
SAVE
. Press
YES
to cancel changes and return to SETUP MAIN
MENU 3.

CUMMINS ALLISON JetScan iFX i100 Specifications

General

Brand	CUMMINS ALLISON
Model	JetScan iFX i100
Category	Bank Note Validator
Language	English