© 2013 Cummins-Allison Corp.
How to Use Stranger Mode
Counterfeit detection is available in STRANGER mode.
To set strap limits, see Strap Counts and Strap Limits.
Select i100-series models process checks, deposit slips and other financial institution
MICR documents that meet U.S. standard specifications.
This section provides instructions for using the STRANGER mode. Notes, checks and tickets can be
processed in STRANGER mode, as described below:
• Note processing: Scans for the first denomination processed, which is the target, and stops when
another denomination is found. When the machine encounters a different denomination, it is
called a stranger. A grand total is provided.
• Check processing: The machine assumes checks are in the hopper. When the machine
encounters a note, it is presented as a no call with a prompt to enter a MICR number. Remove
the note from the pocket and press CONT. Check order integrity settings determine feed error
behavior. (See Check Setup Menu 2 for more information.) A grand total piece count is provided.
• Ticket processing: Scans for a bar code and rejects documents without a bar code as strangers.
Use this mode for batching (strapping) tickets. A grand total piece count is provided.
1. Press MODE on the main screen. The MODE-SELECTION screen appears.
2. Press STRANGER.
3. Press EXIT to return to the main screen.
4. When processing notes, press CF on the main screen to enable counterfeit detection if desired.
Machine is auto-start capable. Feed rollers in hopper rotate inward.
Entanglement and drawing-in hazard.
Do not operate with exposed long hair, neckties, jewelry or loose clothing.
To Next Page
Loading...
Need help?
General
