CUMMINS ALLISON JetScan iFX i100 - Hopper; Required Hopper Guides for Check Processing

© 2013 Cummins-Allison Corp.
7
Hopper
The hopper is the area on the top of the machine where documents are placed for processing. If
the machine is configured to auto-start, the rollers and wheels begin moving as soon as the
machine detects documents in the hopper.
Required Hopper Guides for Check Processing
Additional hopper guides are required for check processing. The stationary guides are installed in
the hopper. Contact a Cummins Allison representative for more information.
When the adjustable hopper guides are raised for check processing, the stationary hopper guides
keep checks aligned as they enter the feeder. This reduces the risk of feed errors and no calls.
Hopper Guides for Check Processing
Machine is auto-start capable. Feed rollers in hopper rotate inward.
Entanglement and drawing-in hazard.
Do not operate with exposed long hair, neckties, jewelry or loose
clothing.
Select i100-series models process checks, deposit slips and other financial
institution MICR documents that meet U.S. standard specifications.