CUMMINS ALLISON JetScan iFX i100 - Setup Main Menu 5; SEPARATE SERIES

JetScan iFX
®
i100 Scanner All Models
74
Setup Main Menu 4
Pressing MORE on SETUP MAIN MENU 3 prompts SETUP MAIN MENU 4:
Setup Main Menu 4 Key
Description
BACK
Returns to SETUP MAIN MENU 3.
MORE
Prompts SETUP MAIN MENU 5.
EXIT
Returns to SETUP MAIN MENU 1.
IMAGE RECEIVER
Setting for use by trained Cummins Allison personnel only.
Setting configures the connection between the machine and the optional
JetScan iFX Image Management Software (IMS) or another host system.
MACHINE IP
Setting for use by trained Cummins Allison personnel only.
MACHINE ID
Setting for use by trained Cummins Allison personnel only.
IMS MENU
ON
: The IMS CONNECTION selection appears on the MAIN SUB-MENU.
OFF
: The IMS CONNECTION selection does not appear on the MAIN SUB-
MENU.
IMS MENU keys are only available on machines
with imaging options activated (serial-number,
check or ticket capture).
The settings are used for the optional JetScan iFX
Image Management Software (IMS).