JetScan iFX
®
i100 Scanner
All Models
Orienting Documents
To orient documents, select SORT and ORIENTATION on the MODE-SELECTION screen.
Make certain the bottom document in the stack is oriented in the desired direction. The machine
uses the bottom document as a reference and stops on all documents oriented in the opposite
direction.
Place documents in the hopper. The machine begins processing. It stops each time it finds a
document that is oriented improperly, and the screen reads “ORIENTATION ERROR
DETECTED.” To resume processing, do one of the following:
• Properly orient the top document in the pocket and press ACCEPT. The document is
added to the total.
• Properly orient the top document in the pocket, return it to the hopper, and press
REJECT. The document is not added to the total.
To Next Page
Loading...
