CUMMINS ALLISON JetScan iFX i100 - Page 104

JetScan iFX
®
i100 Scanner All Models
102
Serial-Number Correction – No Call Screen Serial Number Is Incomplete Screen
Condition
Action
A no call occurred, and the
machine could not identify the
note serial number.
Red question marks denote
all unidentified characters in
the serial number. A picture
of the note’s serial number is
absent from the screen.
To return the note to the hopper for reprocessing:
1. Press
DONE
on the SERIAL-NUMBER CORRECTION screen to prompt the
SERIAL NUMBER IS INCOMPLETE screen.
2. Acknowledge that the note was manually returned to the hopper for
reprocessing by selecting
NOTE PLACED IN THE HOPPER
. This note will not be
included in the count.
Condition
Action
The machine detected an old-
or new-series note while
operating in the
MIXED
mode.
The separate-series feature is
available for USD notes and
configured in
SETUP
.
The screen shows the denomination and the note series that has been selected
in
SETUP
. Choose one of the following options:
• Press
ACCEPT
to add the note to the total.
• Press
REJECT
to exclude the note from the total.
The machine automatically continues processing.