CUMMINS ALLISON JetScan iFX i100 - How to Use Mixed Mode

JetScan iFX
®
i100 Scanner All Models
42
4. To piece count, press COUNT. To value count, press the appropriate denomination value key.
To count checks, press the COUNT CHECK key.
5. Press EXIT to return to the main screen.
Piece-Count Screen Value-Count Screen
When using value count:
• The piece count may be viewed by pressing
UNIT
on the main screen. The piece count
appears in the upper-right corner.
• The International Organization for Standardization (ISO) abbreviation for the active
currency appears after BAT, as shown above.
6. Press ADD on the main screen to accumulate batch totals if desired.
7. Set strap limits if desired. (See Strap Counts and Strap Limits.)
Machine is auto-start capable. Feed rollers in hopper rotate inward.
Entanglement and drawing-in hazard.
Do not operate with exposed long hair, neckties, jewelry or loose clothing.