JetScan iFX
®
i100 Scanner
All Models
Align and justify documents
to the wide horizontal edge.
5. When processing tickets, press CRNCY on the main screen and then press TICKET.
6. When processing checks, press CRNCY on the main screen and then press CHECK.
7. Press ADD on the main screen to accumulate batch totals if desired.
8. Set strap limits if desired. (See Strap Counts and Strap Limits.)
9. Prepare documents for processing, as described below:
• Ensure documents are unfolded and neatly stacked.
• Align and justify documents to the wide horizontal edge.
• Facing and orientation are not required.
• When processing checks, raise the adjustable hopper guides.
• Place documents in the hopper with the horizontal and justified edge toward the feed opening.
This reduces the risk of feed errors and no calls.
10. The machine processes the documents.
When processing notes or tickets: Each time the denomination or document passing through the
machine changes, the machine stops and the screen reads “DENOMINATION CHANGE.” The
change in denomination or document is the first item in the pocket.
Remove contents from the pocket. Separate the denominations and documents, and place them in a
holding area to await a complete strap quantity. When contents are removed from the pocket, the
machine resumes processing and switches to the new denomination or document until another
denomination change.
If the machine stops due to an error, read the instructions on the main screen. For more
information, see Stopping Conditions and Recovery Steps.
11. The machine adds the value of all documents processed, provides a total, and stops automatically
after the last document in the hopper is read. The batch is ended when the documents are removed
from the pocket. If the ADD key is ON, press END to end the batch, restart the count, and begin
the next batch.
Machine is auto-start capable. Feed rollers in hopper rotate inward.
Entanglement and drawing-in hazard.
Do not operate with exposed long hair, neckties, jewelry or loose clothing.
To Next Page
Loading...
Need help?
General
